Technical Specifications

• Voltage: 105~305V;
• Operating frequency: 50/60Hz;
• Power consumption: <1W or 10VA capacitive;
• Brightness required to switch on: between 5 and 15 Lux;
• Brightness at shut-off: up to 30 Lux;
• Initial state of the contacts: Normally open (NO);
• Failure mode: Fail-off (FD);
• Operating mode: activates the load at night and deactivates it during the day (Night On);
• Delay classification: AR (fast actuation);
• Technology: microcontroller-based;
• Surge protection: @1.2×50μs: 10kV;
• Dielectric strength: ≥ 2500V @ 1 minute;
• Time filter: double delay that prevents unintended activations due to sudden changes in brightness such as lightning, lasers, clouds, etc. Between 2 and 5 seconds to turn on or off;
• Material: Polypropylene (PP);
• Protection rating: IP67;
• Warranty: 3 years;
• Dimensions: Ø76×54.8mm;
• NBR5123 standard;
• Operation code: T2LNFDRNAR;
• Inrush Control Technology: Exclusive switching system with voltage gradients <50V, increasing the lifespan of the load and the relay;
• Indelible marking map of the time of removal and placement in the field;
• To control loads exceeding the specified capacity, use the relay in conjunction with an Exatron Group Control Switch (30, 50 or 60 amperes) available in the under/over voltage control version;
• Application: high-performance relay for street lighting;
• Contact activation near zero voltage of the electrical network (zero-crossing) less than 1ms;
• Relationship between on and off cycles (hysteresis): 1.5 to 2.8 times;
• Delay, tr = response time (s) – (fast 0.5 < tr < 5);
• Silicon photocell sensor: phototransistor;
• Exclusive system that prevents the load from being activated in the presence of DC voltage (positive or negative) at the load, protecting the contacts;
• Operating temperature: -5°C to 50°C;
• For this product to function correctly, the minimum required power is 1W.
• Control power:

Installation

Insert the relay into the socket in the corresponding positions;

Turn the relay clockwise to lock it.