Technical Specifications

• Voltage: 105-305V;
• Operating frequency: 60Hz (50Hz upon request);
• Power consumption: <0.8W;
• Brightness required to switch on: between 5 and 15 Lux;
• Brightness at shutdown: less than 30 Lux respecting the hysteresis ratio between on and off (hysteresis) 1.5 to 3.0 times – According to current NBR5123;
• Initial state of contacts: Normally open (NO) – Normally closed (NC) model on demand;
• Failure mode: Fail-off (FD);
• Operating mode: activates the load at night and deactivates it during the day (Night On);
• Delay classification: AI (instantaneous activation);
• Technology: Magnetic photocontroller for alternating current electrical networks, with an electrically assisted magnetic mechanical switching system, and a coil-hammer-ferromagnetic core type electrical contact assembly. The mechanical switching provides robustness to the product, directly contributing to a longer lifespan. The photoelectric sensor is encapsulated in shielded resin for high durability.
• Surge protection: From 4,000 to 10,000V (1.2×50µs)*;
• Dielectric strength: ≥ 2500V @1 minute 60Hz;
• Illuminance filter: prevents accidental activation due to sudden changes in brightness such as lightning, lasers, headlights, clouds, etc. 1-second filter for turning on or off;
• Material: Polycarbonate (PC) resin cup with UV protection, polypropylene resin base, and tin-plated brass terminals;
• Protection rating: IP65 (IP67 upon request);
• Warranty: 5 years;
• Dimensions: Ø76×54.8mm;
• NBR5123 standard;
• Operation code: T2LNFDRNAI;
• Inrush Control Technology: Exclusive switching system with voltage gradients <50V, increasing the lifespan of the load and the relay;
• Indelible marking map on the cup, according to NBR5123;
• To control loads exceeding the specified capacity, use the relay in conjunction with an Exatron Group Control Switch (30, 50 or 60 amperes) available in the under/over voltage control version;
• Type of drive: individually assisted electromagnetic;
• Operating cycles: minimum of 5000 cycles as per current NBR5123 standard;
• Storage temperature: -30 and +60°C;
• Operating temperature: -10 and +50°C;
• Contact activation delay: <1ms (relative to zero voltage level);
• Packaging type: Honeycomb;
• Control power:

* Subject to availability.

Installation

Fit the relay into the NEMA – NBR5123 standard socket in the corresponding positions;

Turn the relay clockwise to lock it.