Technical Specifications

• Voltage: 105~305V;
• Operating frequency: 50/60Hz;
• Power consumption: <1W or 10VA capacitive;
• Brightness required to switch on: between 5 and 15 Lux;
• Brightness at shut-off: up to 30 Lux;
• Initial state of the contacts: Normally open (NO);
• Failure mode: Fail-off (FD);
• Operating mode: activates the load at night and deactivates it during the day (Night On);
• Delay classification: AR (fast actuation);
• Technology: microcontroller-based;
• Surge protection: @1.2×50µs: 10kV;
• Dielectric strength: ≥ 2500V @ 1 minute;
• Operating temperature: -5°C to 50°C;
• Delay, tr = response time (s): (fast 0.5 < tr < 5);
• Time filter: double delay that prevents unintended activations due to sudden changes in brightness such as lightning, lasers, clouds, etc. Between 2 and 5 seconds to turn on or off;
• Material: Cup made of polycarbonate (PC) resin with anti-UV protection, base made of polypropylene (PP) copolymer resin, PVC gasket and tin-plated brass pins/terminals;
• Protection rating: IP67;
• Warranty: 5 years;
• Dimensions: ⌀76×43.5×54.8mm;
• NBR5123 standard;
• Operation code: T2LDFDRNAR;
• Inrush Control Technology: exclusive near-zero switching system for the sine wave network, increasing the lifespan of the load and the relay;
• Indelible marking map of the time of removal and placement in the field;
• To control loads exceeding the specified capacity, use the Electronic Photocontrol Relay in conjunction with an Exatron Group Control Switch (30, 50 or 60 amperes) available in the under/over voltage control version;
• Silicon photocell sensor: phototransistor;
• For this product to function correctly, the minimum required power is 1W;
• Control power:

Installation

Fit the relay into the NEMA – NBR5123 standard socket in the corresponding positions;

Turn the relay clockwise to lock it.