Technical Specifications

• Voltage: 105-305V;
• Operating frequency: 60Hz (50Hz upon request);
• Power consumption: <0.8W;
• Brightness required to switch on: between 5 and 15 Lux;
• Brightness at shutdown: less than 30 Lux respecting the hysteresis ratio between on and off (hysteresis) 1.5 to 3.0 times – According to current NBR5123;
• Initial state of the contacts: Normally closed (NC);
• Failure mode: Fail-on (FL);
• Operating mode: activates the load at night and deactivates it during the day (Night On);
• Delay classification: AI (instantaneous activation);
• Technology: Magnetic photocontroller for alternating current electrical networks, with an electrically assisted magnetic mechanical switching system, and a coil-hammer-ferromagnetic core type electrical contact assembly. The mechanical switching provides robustness to the product, directly contributing to a longer lifespan. The photoelectric sensor is encapsulated in shielded resin for high durability.
• Surge protection: Up to 10,000V (1.2×50µs);
• Dielectric strength: ≥ 2500V @1 minute 60Hz;
• Illuminance filter: prevents accidental activation due to sudden changes in brightness such as lightning, lasers, headlights, clouds, etc. 1-second filter for turning on or off;
• Material: Protective cup made of polycarbonate (PC) resin with anti-UV additive to withstand the highest levels of weathering, support base made of polypropylene (PP) resin with additives, electrical terminals in brass with tin plating for greater weather resistance, sealing gasket with rubber lip to ensure a high degree of protection during installation;
• Protection rating: IP65 (IP67 upon request);
• Warranty: 5 years;
• Dimensions: Ø76×54.8mm;
• NBR5123 standard;
• Operation code: T2LNFLRNAI;
• Inrush Control Technology: Exclusive switching system with voltage gradients <50V, increasing the lifespan of the load and the relay;
• Indelible marking map on the cup, according to NBR5123;
• To control loads exceeding the specified capacity, use the relay in conjunction with an Exatron Group Control Switch (30, 50 or 60 amperes) available in the under/over voltage control version;
• Type of drive: individually assisted electromagnetic;
• Operating cycles: minimum of 5000 cycles as per current NBR5123 standard;
• Storage temperature: -30 and +60°C;
• Operating temperature: -10 and +50°C;
• Contact activation delay: <1ms (relative to zero voltage level);
• Packaging: Honeycomb;
• Control power:

Installation

Fit the relay into the NEMA – NBR5123 standard socket in the corresponding positions;

Turn the relay clockwise to lock it.