Technical Specifications

• Voltage: 105~305V;
• Operating frequency: 50/60Hz;
• Brightness at startup: 7 Lux;
• Brightness at shut-off: up to 30 Lux;
• Turn-on time delay: 5 seconds;
• Delay before shutdown: 7 seconds;
• Initial state of the contacts: Normally closed (NC);
• Fault type: Fail-on (FL);
• Operating mode: activates the load at night and deactivates it during the day (Night On);
• Delay classification: AR (fast actuation);
• Technology: microcontroller-based;
• Surge protection: via varistor 10kV @1.2×50μs: / 5kA – 360J;
• Operating cycles: 20,000 cycles (on/off);
• Time filter: double delay that prevents unintended activations due to sudden changes in brightness such as lightning, lasers, clouds, etc.
• Material: The cup is made of polycarbonate (PC) resin with UV protection in blue – NBR5123 standard. The base is made of polypropylene copolymer (PP) resin, the gasket is made of PVC, and the pins/terminals are made of tinned brass.
• Protection rating: IP67;
• Warranty: 5 years;
• Dimensions: Ø76×43.5×54.8mm;
• Operation code: T2LNFLRNAR;
• Load activation via electromechanical switch (relay) - supports loads from 30 A to 120V~;
• Supports inrush current from 40 to 100A;
• Inrush Control Technology: Exclusive near-zero switching system for the sine wave network, increasing the lifespan of the load and the relay;
• Indelible marking map of the time of removal and placement in the field;
• To control loads exceeding the specified capacity, use the relay in conjunction with an Exatron Group Control Switch (30, 50 or 60 amperes) available in the under/over voltage control version;
• Application: high-performance relay for street lighting;
• Silicon photocell sensor: phototransistor;
• Operating temperature: -10°C to 70°C;
• Moisture resistance: 99% relative humidity at 50°C.
• Control power:

Installation

Plug type: Twist-lock;

Fit the relay into the NEMA – NBR5123 standard socket in the corresponding positions;

Turn the relay clockwise to lock it.