Hello, welcome!

Entrar

CARRINHO (0 ITENS)

Seu carrinho está vazio.

Ir para a loja
TOTAL ESTIMADO R$ 0,00
FINALIZE ORDER VIEW CART CONTINUE SHOPPING

2nd copy of payment slips

Click here

CARRINHO (0 ITENS)

Seu carrinho está vazio.

Ir para a loja
TOTAL ESTIMADO R$ 0,00
CHECKOUT VIEW CART CONTINUE SHOPPING
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
UFO Ceiling Mount Presence Sensor
Miniatura do vídeo

Information

Technical Specifications

  • Energy savings of up to 75%.
  • Coverage: The product has a 360° coverage lens; when installed at a height of 6 m, it covers a range of up to 20 m at an ambient temperature of 25ºC.
  • Adjustments via internal potentiometers:
  • Configurable timer with time recount (10sec, 30sec, 90sec, 5min, 10min and 30 minutes).
  • Light sensor that allows you to choose the light level at which the sensor will activate the lamps from among the existing options, avoiding energy waste. Photocell with adjustment: minimum to maximum.
  • Sensitivity Adjustment: Minimum to Maximum
  • Power supply voltage: 100 – 240 V~ 50/60 Hz 0.5W.
  • Detects heat sources (people, cars, etc.) that must be at least 3°C different from the ambient temperature where the sensor is installed (for indoor use).
  • It controls any type of light bulb up to its maximum power.
  • Suitable for surface mounting installations.
  • Warranty: 3 years.
  • Command Power:
VoltageLEDCompact/fluorescentIncandescent/halogen
127V~200 W500 W1,000 W
220V~300 W1,000 W2,000 W
FP >0.90

Installation

  • Turn off the power.

Move the top cover by turning it counterclockwise. Remove the cable tie.

  • Connect the load according to the wiring diagram.
  • Replace the wire clamp and secure the sensor with screws in the desired location.
  • Reinstall the top cover on the sensor, turn on the power, and test the product.

UFO Ceiling Mount Presence Sensor

available

Code: LEST4008

Description

The NI PLUS 360G/20M Ceiling Mount Presence Sensor – LEST4008 is an intelligent control device designed for the timed activation of loads. It detects the movement of heat sources such as people and cars through an infrared sensor, activating the load and remaining on as long as presence is detected, and deactivating at the programmed time after the last presence detection.

It is ideal for controlling lighting in hallways, stairwells, garages, entrances, reception areas, warehouses, storage rooms, and other indoor environments in homes, offices, condominiums, industries, hotels, and public institutions where a greater detection range is required.

It possesses superior immunity against emitted and induced interference caused by electronic reactors, cell phones, and two-way radios.

Download

Packaging

User manual

R$ 92,35

Shipped within 7 business days.
Price* for end consumer

Information

Technical Specifications

  • Energy savings of up to 75%.
  • Coverage: The product has a 360° coverage lens; when installed at a height of 6 m, it covers a range of up to 20 m at an ambient temperature of 25ºC.
  • Adjustments via internal potentiometers:
  • Configurable timer with time recount (10sec, 30sec, 90sec, 5min, 10min and 30 minutes).
  • Light sensor that allows you to choose the light level at which the sensor will activate the lamps from among the existing options, avoiding energy waste. Photocell with adjustment: minimum to maximum.
  • Sensitivity Adjustment: Minimum to Maximum
  • Power supply voltage: 100 – 240 V~ 50/60 Hz 0.5W.
  • Detects heat sources (people, cars, etc.) that must be at least 3°C different from the ambient temperature where the sensor is installed (for indoor use).
  • It controls any type of light bulb up to its maximum power.
  • Suitable for surface mounting installations.
  • Warranty: 3 years.
  • Command Power:
VoltageLEDCompact/fluorescentIncandescent/halogen
127V~200 W500 W1,000 W
220V~300 W1,000 W2,000 W
FP >0.90

Installation

  • Turn off the power.

Move the top cover by turning it counterclockwise. Remove the cable tie.

  • Connect the load according to the wiring diagram.
  • Replace the wire clamp and secure the sensor with screws in the desired location.
  • Reinstall the top cover on the sensor, turn on the power, and test the product.
Default Kit

Hello, welcome!

To enter

2nd copy of payment slips

Click here