Technical Specifications

• Nominal voltage: 100 – 240 V~ 50/60Hz;

• Self-consumption: less than 1.0W;

• Coverage: 360° with a reach of up to 7m in diameter at an ambient temperature of 25ºC, at a height of approximately 2.4m;

• Operating temperature: -5°C to 40°C;

• For indoor use only;

• It detects the movement of heat sources such as people, cars, etc. The temperature difference between the sensor and the ambient temperature (at least 3°C) is required.

• Time settings: 1 and 30 seconds, 1 to 5 minutes, 10, 15, 20, 25, 30, 40 and 50 minutes, 1, 1:30, 2, 2:30, 3 and 4 hours;

• Light Sensor (LUX-PHOTOCELL): 1 (at night) to 4 (without photocell);

• Sensitivity adjustment: 1 (sudden movements) to 3 (greater range);

• Lamp-friendly: load activation system with low electrical voltage < 50 V, increasing the lifespan of the assembly (lamps, ballast and sensor);

• Surface-mounted or recessed installation;

• It has an LED indicator for operation, detection, and configured parameters;

• Energy savings of up to 75%;

• Surge protection: 2KV;

• Composition: plastic components, electronic components and metal alloys;

• Includes mounting screws and spring for recessed installation in plasterboard ceilings;

• Warranty: 2 years;

• Case material: Plastic components (ABS), electronic components, and metal alloys;

• Color: White or Black;

• Protection rating: IP32;

• Control power: We have two control power versions; please check the back of the product before installation. In “Download” you will find the packaging and manuals for both versions (higher and lower control power).

The maximum drive power should not be added together in parallel installations.