Technical Specifications

• Voltage: 100-240V~;
• Power consumption: <1W;
• Operating frequency: 50-60Hz;
• Surge protection: 1kV;
• Dimensions: 100x66mm;
• Coverage: Up to 135° with a range of up to 12m at an ambient temperature of 25°C, at a height of 2.5m (see detection map). Detection map adjustable according to the application and use of the focus guide); Frontal coverage up to 12m and lateral coverage up to 7m on each side;
• Time adjustment (timing): 1 to 5s, 10, 15, 30 and 45s, 1 to 5min, 10, 15, 20, 25, 30, 40 and 50 min, 1 hour, 1:30, 2, 2:30, 3, 3:30 and 4 hours;
• Ambient Light Sensor: 1 (at night) to 30 (at dusk) and 31 (always – without photocell), Autolux: memorizes the current ambient light as the minimum ambient light level;
• Sensitivity adjustment: 1 (sudden movements) to 8 (greater range);
• Relay Function: The sensor functions as a timed photocontrolled relay. At dusk, it keeps the load switched on for the programmed time (0:30 to 12 hours) and then returns to sensor function.
• Keep On function: Keeps the load on for the programmed time (0:30 to 12 hours). One-time action;
• Keep Off Function: Keeps the load off for the programmed time (0:30 to 12 hours). One-time action;
• Enable/Disable LED Function: Allows you to disable the LED, preventing the product from flashing when it detects movement;
• Exclusive Inrush Control Technology, a near-zero network switching system (sine wave) that increases the lifespan of the load assembly (lamps, ballast, and sensor);
• It has an LED indicator for operation, detection, and configured parameters – when the product is operating in one of the following modes: Relay Function, Keep On, or Keep Off, the LED oscillates (blinks slowly and gradually);
• Detects heat sources (people, cars, etc.) that must be at least 3°C different from the ambient temperature where the sensor is installed (for indoor use);
• The sensor saves the previously configured parameters (timer settings, brightness, sensitivity, and operating mode) in case of power failure and restoration;
• The maximum drive power should not be added together in parallel installations;
• Energy savings of up to 75%;
• Components: plastics, electronics, and metal alloys;
• Protection rating: IP54;
• Includes screw and wall anchor for installation.

• Warranty: 3 years